Skip to main content
A private network connects your servers in the same city over an isolated address range. Each server gets an extra network interface and an address on that range, and can reach the other servers directly. Private traffic doesn’t count toward your bandwidth quota. A network covers one city. You can only create one in a city where you already have a server, and only servers in the network’s team can join. At https://console.advinservers.com, click “Private Networks” under “Networking” in the sidebar. Each server also has a “Private Network” tab. Private Networks page with Create Network action

Create a network

Private networks setup dialog
1

Open the dialog

Click “Private Networks” in the sidebar, then Create Network.
2

Fill in the details

  • Network name: up to 64 characters. Letters, digits, spaces, dashes, underscores and dots.
  • City: only cities where you have a server are listed.
  • Address range: in CIDR notation. We fill in a free range, and you can change it.
3

Create it

Click Create. The network shows its Range, City and number of Servers.
The range must:
  • sit inside 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16,
  • have a prefix from /8 to /30 with no bits set below it (10.20.30.0/24, not 10.20.30.5/24),
  • not overlap another network your team has in that city.
You can’t change the range or city later.

Add a server

You can add a server from the network or from the server.
1

From the network

Click the network, which opens on “Servers”. Click Add Server and choose the Server. Only your servers in that city that aren’t already on it are listed.
2

Choose its address

Under Address, pick Assign one automatically, or Choose an address and enter an IP address on the range. Click Add.
Or, from the server: click it, open “Private Network” and click Add Private Network. Choose a Network, then Automatic or Manual under IP Address. To start a new network instead, choose Create a new network and enter a Network name. We pick a free range in the server’s city and add the server. Click Add. Attaching becomes Attached when it’s done.
The private interface comes up on the next reboot. Reboot the server after adding it.
A server can be on several networks. Addresses must be on the range and unique within the network. The first and last addresses of the range can’t be used.

Detach a server

  • From the network’s “Servers” tab, open the server’s row menu and choose Detach from network.
  • From the server’s “Private Network” tab, open the network’s row menu and choose Detach.
Confirm in the dialog. The address goes back to the range. Detaching runs in the background, and the interface disappears on the server’s next reboot. The network and its other servers aren’t affected.

Rename or delete a network

To rename, open the network, click “Settings”, change Name and click Save. To delete, open the network, click “Delete” and then Delete. You can also use Delete in the menu on “Private Networks” or on a server’s “Private Network” tab. Type the network’s name to confirm.
Deleting a network detaches every server and removes their private connections. This can’t be undone.

Good to know

No. The console firewall doesn’t. Use a firewall inside your servers.
No. A server can only join a network in its own city.
Only servers in the network’s city and team that aren’t already on it are listed.
It’s added on the server’s next reboot. Reboot from the console and check again.