Skip to main content
Every server has a “Networking” tab listing its IP addresses, with each address’s netmask and gateway. Servers in Nuremberg, DE also have a “DDoS Protection” tab. Open your server at https://console.advinservers.com, then click the tab you need. Team members can see “Networking” with View servers. Changing addresses needs Change networking. Buying or cancelling an address needs Make purchases. The team owner can do all of it. Networking page with addresses, gateways and reverse DNS

Read the address table

Each row’s menu shows only the actions your role allows. For reverse DNS, see Reverse DNS.

Add an address

1

Open the dialog

Click Add Address above the table.
2

Choose the address

Pick one of your floating IPs from Address. Only addresses that aren’t attached elsewhere and can reach this server are listed.To buy a new one, choose Create a new floating IP and pick IPv4 or IPv6 under Address type. The Price field shows the cost. Prepaid teams pay from account credit. Postpaid teams are billed hourly on the monthly invoice.
3

Confirm

Click Attach address, or Buy and attach for a new one. Status shows Attaching, then Attached.

Detach or cancel a floating IP

  • Detach takes the address off this server. You keep it and keep paying for it, and you can attach it to another server later. Anything using it here stops responding.
  • Cancel address ends the rental. See cancelling an address.
To detach several at once, tick their rows and click Detach in the bar that appears. Only floating IPs can be detached. To get rid of a primary address, make another IPv4 primary first.

Change the primary IP

Open an attached floating IPv4’s menu and choose Set as Primary. The two addresses swap roles, and the old primary becomes the floating IP you rent. Only IPv4 can be primary. The full procedure is in Change Your IPv4 Address. If the option is missing, you need Change networking and another attached IPv4 that is active, paid and not scheduled for cancellation. Wait for any running server operation to finish.

IPv6 allocation

Use the address, prefix and gateway shown on your server’s “Networking” tab. Layouts differ between locations and servers. A typical allocation is one on-link address plus a routed subnet. Some locations use an on-link subnet instead. A routed range isn’t configured inside your operating system for you. Pick addresses from the range and add them yourself. You don’t need a floating IP for each one. Keep the working on-link address and default route, and save the configuration so it survives a reboot. To check what’s configured, run these on Linux:
On Windows, use ipconfig /all and route print -6. Keep VNC open while you edit network settings so you can recover if remote access drops. Containers and VPNs behind a routed subnet need forwarding, routing and firewall rules inside the server. On Ubuntu with Netplan, see the Netplan tutorial. Don’t paste a template written for a different interface or server over a working config. If IPv4 works but IPv6 doesn’t:
  • Check that your own network supports IPv6.
  • Check the address, prefix, gateway, the firewall inside your server, and that the application listens on IPv6.
  • If only a hostname fails, check its AAAA record.
If the allocation or routing looks wrong, open a support ticket with the server name, affected addresses, test time and the output of the commands above.

DDoS Manager

The “DDoS Protection” tab lets you add filtering rules for protected IPv4 addresses. It exists only for servers in Nuremberg, DE. Our other locations don’t offer DDoS filtering. See DDoS Protection for how filtering works and which presets exist. Pick an address from IP Address at the top. The table lists its rules by Protocol, Preset, Min Port, Max Port and Created. Viewing needs View networking, creating rules and changing settings needs Change networking, and deleting rules needs Delete networking resources.

Create a rule

1

Open the dialog

Click Create Rule.
2

Pick the protocol and preset

Choose the Protocol: TCP, UDP, ICMP or GRE. Preset then lists only the presets for that protocol.
3

Enter the ports

For TCP and UDP, enter the port in Min Port. For a range, also fill in Max Port (optional). Without it, the rule covers one port. Ports run from 1 to 65535.
4

Create the rule

Click Create.
To remove a rule, open its row menu, choose Delete and type the rule’s ID.

Address settings

The “IP Configuration” card holds two settings for the selected address. Change them and click Save Changes.
Drop discards all traffic to the address that doesn’t match one of your rules. Add rules for every service you run before you choose it.